News
03.02.2012: Mirek Nawa: New German Service Manager in Asia Pacific
Mirek Nawa will be supporting our subsidiary, Leifeld Machinery Trading (Shanghai) Co., Ltd., as Service Manager for the Asia/Pacific region.
more...
29.01.2012: IMTEX FORMING 2012
From January 19 to 24, 2012, the trade show for machine tools, IMTEX FORMING and TOOLTECH 2012, tool place in Bangalore, India.
more...
03.11.2011: Changes in the leadership of Leifeld Metal Spinning AG
The new year will see a new management team in place at Leifeld Metal Spinning AG, Ahlen. As of 1 January 2012, Gerhard Glanz will take over as CEO of the company...
more...
27.10.2011: Leifeld delivers new KSA flow-forming machine to Daimler
Leifeld Metal Spinning delivered KSA flow-forming and profiling machine to Daimler for the manufacture of complex transmission parts. This machine combines well-established flow-forming technology from Leifeld with...
more...
01.09.2011: Take the opportunity
The PNC 75 is an used and cost-effective alternative to our modern high-performance machine programme. Until October 31, 2011, you can take advantage of our youngtimer...
more...
01.08.2011: Chinese subsidiary starts off
In August Leifeld will set up its subsidiary Leifeld Machinery Trading (Shanghai) Co., Ltd. based in Shanghai. Hence, Leifeld continually increases its strategic expansion of Asian sales network. Local presence and new technological ...
more...
01.07.2011: Leifeld Consulting Service
Would you like to increase your machine output? Are you seeking for support in new product developments? Or would you like to like to increase machine life? ...
more...
28.02.2011: - Light-weight design and perspective of flow-forming technology -
Particularly the automotive industry is eager to take advantages of reduced weight and costs as well as low fuel consumption. Based on a long tradition in research and development, Leifeld has consistently advanced and ...
more...
17.12.2010: - Leifeld Metal Spinning GmbH has been incorporated -
As of today, Leifeld Metal Spinning, based in the German town of Ahlen/Westphalia, has been incorporated. The incorporation was completed with the registration at the commercial register of Munster...
more...
07.12.2010: New spinning machine generation: dynamic control management and modern machine design
After many years of great success, the PNC series is now replaced by the new spinning machine generation SC series. Werner Hütter, CTO at Leifeld Metal Spinning GmbH, is enthusiastic...
more...
29.10.2010: Award for new developments and innovations of Leifeld Metal Spinning GmbH
Continuously grown competence combined with convincing innovative power in international business: Dr. Georg Kofler has been honoured for his contributions to...
more...
14.06.2010: New AFPM series for manufacture of flagpoles
The Automatic Flagpole Machines (AFPM) are especially designed for manufacture of flagpoles or conic pipes. Because of its flexibility, this machine concept allows forming of all stainless steels and aluminium alloys.
more...
18.05.2010: New standards in flow-forming technology
Leifeld’s latest challenge was to design the world’s largest flow-forming machine for a Chinese customer. Leifeld was chosen over its competitors in recognition of its first-class service, excellent price/performance ratio, and other critical requirements.
more...
25.01.2010: Focus on lightweight construction and small series within the Automotive Industry
The proven Leifeld machine series FFC achieved already in the early 90’s a great success in manufacturing complex and splined transmission parts.
more...
22.12.2009: Leifeld - Powered by Affection.
The past year of 2009 was characterized by the world-wide economic turmoil which led to drastic breakdown of incoming orders and resulting cost reduction in companies.
more...
24.11.2009: Convincing technology
With Leifeld’s technology you’re able to keep your feet warm inspite of the cold weather.
more...
03.11.2009: Leifeld's website now more userfriendly
With their new website, Leifeld presents itself in a new look.
more...
29.09.2009: Leifeld spinning machines now even more precise and with higher surface finish
The success of the PNC 100 series is now replaced by the new spinning machine generation PNC 200 series with combined PNC/CNC control.
more...
28.09.2009: Leifeld Academy: Optimize your spinning process
The metal spinning workshop is addressed to companies who would like to organize their machine application in daily production grind more efficiently.
more...
10.09.2009: Leifeld presents world’s largest flow-forming machine
Leifeld presents the world’s largest flow-forming machine, allowing high-precision flow forming of tubes over 13 metres long.
more...
21.08.2009: Leifeld enhances its sales activities in Scandinavia
Strong partnerships and new technological innovations are Leifeld’s keys to worldwide success.
more...
30.07.2009: Take advantage of our summer offer
The PNC 350 is a used and cost-effective alternative to our modern high-performance machine programme.
more...
28.07.2009: Learn more with Leifeld News
With Leifeld technologies you can keep cool even on hot summer days.
more...
23.07.2009: INFIN: specialist for machine tools in India
Until recently, Leifeld has continually expanded its sales activities in Asia by winning new partners.
more...
30.06.2009: Strong cooperation with NMC Teknopark
The strategic development of their global sales network buttresses Leifeld.
more...
Mirek Nawa will be supporting our subsidiary, Leifeld Machinery Trading (Shanghai) Co., Ltd., as Service Manager for the Asia/Pacific region.
more...
29.01.2012: IMTEX FORMING 2012
From January 19 to 24, 2012, the trade show for machine tools, IMTEX FORMING and TOOLTECH 2012, tool place in Bangalore, India.
more...
03.11.2011: Changes in the leadership of Leifeld Metal Spinning AG
The new year will see a new management team in place at Leifeld Metal Spinning AG, Ahlen. As of 1 January 2012, Gerhard Glanz will take over as CEO of the company...
more...
27.10.2011: Leifeld delivers new KSA flow-forming machine to Daimler
Leifeld Metal Spinning delivered KSA flow-forming and profiling machine to Daimler for the manufacture of complex transmission parts. This machine combines well-established flow-forming technology from Leifeld with...
more...
01.09.2011: Take the opportunity
The PNC 75 is an used and cost-effective alternative to our modern high-performance machine programme. Until October 31, 2011, you can take advantage of our youngtimer...
more...
01.08.2011: Chinese subsidiary starts off
In August Leifeld will set up its subsidiary Leifeld Machinery Trading (Shanghai) Co., Ltd. based in Shanghai. Hence, Leifeld continually increases its strategic expansion of Asian sales network. Local presence and new technological ...
more...
01.07.2011: Leifeld Consulting Service
Would you like to increase your machine output? Are you seeking for support in new product developments? Or would you like to like to increase machine life? ...
more...
28.02.2011: - Light-weight design and perspective of flow-forming technology -
Particularly the automotive industry is eager to take advantages of reduced weight and costs as well as low fuel consumption. Based on a long tradition in research and development, Leifeld has consistently advanced and ...
more...
17.12.2010: - Leifeld Metal Spinning GmbH has been incorporated -
As of today, Leifeld Metal Spinning, based in the German town of Ahlen/Westphalia, has been incorporated. The incorporation was completed with the registration at the commercial register of Munster...
more...
07.12.2010: New spinning machine generation: dynamic control management and modern machine design
After many years of great success, the PNC series is now replaced by the new spinning machine generation SC series. Werner Hütter, CTO at Leifeld Metal Spinning GmbH, is enthusiastic...
more...
29.10.2010: Award for new developments and innovations of Leifeld Metal Spinning GmbH
Continuously grown competence combined with convincing innovative power in international business: Dr. Georg Kofler has been honoured for his contributions to...
more...
14.06.2010: New AFPM series for manufacture of flagpoles
The Automatic Flagpole Machines (AFPM) are especially designed for manufacture of flagpoles or conic pipes. Because of its flexibility, this machine concept allows forming of all stainless steels and aluminium alloys.
more...
18.05.2010: New standards in flow-forming technology
Leifeld’s latest challenge was to design the world’s largest flow-forming machine for a Chinese customer. Leifeld was chosen over its competitors in recognition of its first-class service, excellent price/performance ratio, and other critical requirements.
more...
25.01.2010: Focus on lightweight construction and small series within the Automotive Industry
The proven Leifeld machine series FFC achieved already in the early 90’s a great success in manufacturing complex and splined transmission parts.
more...
22.12.2009: Leifeld - Powered by Affection.
The past year of 2009 was characterized by the world-wide economic turmoil which led to drastic breakdown of incoming orders and resulting cost reduction in companies.
more...
24.11.2009: Convincing technology
With Leifeld’s technology you’re able to keep your feet warm inspite of the cold weather.
more...
03.11.2009: Leifeld's website now more userfriendly
With their new website, Leifeld presents itself in a new look.
more...
29.09.2009: Leifeld spinning machines now even more precise and with higher surface finish
The success of the PNC 100 series is now replaced by the new spinning machine generation PNC 200 series with combined PNC/CNC control.
more...
28.09.2009: Leifeld Academy: Optimize your spinning process
The metal spinning workshop is addressed to companies who would like to organize their machine application in daily production grind more efficiently.
more...
10.09.2009: Leifeld presents world’s largest flow-forming machine
Leifeld presents the world’s largest flow-forming machine, allowing high-precision flow forming of tubes over 13 metres long.
more...
21.08.2009: Leifeld enhances its sales activities in Scandinavia
Strong partnerships and new technological innovations are Leifeld’s keys to worldwide success.
more...
30.07.2009: Take advantage of our summer offer
The PNC 350 is a used and cost-effective alternative to our modern high-performance machine programme.
more...
28.07.2009: Learn more with Leifeld News
With Leifeld technologies you can keep cool even on hot summer days.
more...
23.07.2009: INFIN: specialist for machine tools in India
Until recently, Leifeld has continually expanded its sales activities in Asia by winning new partners.
more...
30.06.2009: Strong cooperation with NMC Teknopark
The strategic development of their global sales network buttresses Leifeld.
more...